Before Use Remove Protective Coverings Position and Connect the Charging Dock Before use, remove the protective strips from both sides of the vacuum- mop's bumper as well as the protective film on the visual navigation sensor. Place the charging dock near an electrical outlet in an area with a good Wi-Fi signal. To ensure the vacuum-mop can return to the charging dock, leave at least 0.5 meters of clearance on either side of the charging dock and at least 1.5 meters of open space in front, and make sure no objects are directly overhead. Do not place the charging dock under furniture, such as a cabinet, or chair.
Connect the power cord to the charging dock and tidy up any loose cord to prevent the vacuum-mop from getting tangled, which could accidentally move or unplug the charging dock. Install the Side Brush Insert the side brush into the attachment slot on the bottom of the vacuum-mop. > 0.5 m > 0.5 m > 1.5 m Tidy up Any Loose Cord Note: Make sure the charging dock is in a well-lit area out of direct sunlight and away from reflective objects, such as mirrors, which can prevent the vacuum-mop from returning to the charging dock. 8