Installation 1. Place the charging dock on the level ground against wall and connect to a power outlet 3. Connecting with Mi Home/Xiaomi Home App This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app Store to download and install it. Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. > 0.5 m > 1.5 m > 0.5 m Note:
Make sure there is a distance of 0.5 meters or more on either side of the charging dock, and more than 1.5 meters in front of it. Connect the power cord to the charging dock and tidy up any loose cord to prevent it from geting tangled up by the vacuum-mop, which could accidentally move or unplug the charging dock. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. 2. Turn on and charge the vacuum-mop Press and hold the buton ， When the power indicator lights up, place the vacuum-mop onto the charging dock to recharge. Note:
The version of the app might have been updated, please follow the instructions based on the current app version. Reset Wi-Fi Note: If the vacuum-mop is unable to turn on due to low batery, place it directly onto the charging dock to recharge. When there is a connection loss between your phone and the vacuum-mop due to the router reconfiguration, wrong password or so, please open the cover of the vacuum-mop so that you can see the Wi-Fi indicator. Simultaneously press and hold the butons and until you hear a voice saying "Waiting for the network configuration". Once the Wi-Fi indicator is slowly blinking, the Wi-Fi has been successfully reset. Battery Level Indicator White:
Battery level is more than 15% Orange: Battery level is less than 15% 7