Read this manual carefully before use, and retain it for future reference. Safety Instructions PRECAUTIONS When maintaining and cleaning, disassemble the fan base before removing other parts. Make sure you install the fan base last when assembling the fan. Installation Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user. To avoid electric shocks, fire, personal injury, or other damage, please strictly follow the installation steps instructed by the user manual, and make sure the fan base is assembled in the last step. Ensure that the fan is switched off from the supply mains before removing the guard.
Do not connect the fan to the electrical outlet until it is fully assembled. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Transportation Turn off and unplug the fan before moving it. Do not strike, crush, and drop the product, or expose it to pressure. Firmly hold the fan stand to avoid it from falling down and causing personal injury. Keep the product away from water and heat sources. Do not use this product in environments where the temperatures and humidity are extremely high. Avoid direct sunlight.
Using the Fan Immediately stop using the fan if it makes unusual sounds, gives off bad odors, overheats, or rotates irregularly. Do not lean on or tilt the fan while it is running. Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism. Power Cord Disconnect the fan from the electrical outlet before doing maintenance or moving it. When the power cord is damaged, it must be replaced with a genuine one purchased from the manufacturer or afer-sales service department. Always unplug the fan by pulling the power plug rather than the cord. 2