Installation Connecting to an electrical outlet How to Use Step 5: Install the front grille Align the front grille alignment mark with the rear grille lef alignment mark, and make sure the front grille is properly embedded into the rear grille. Turn the front grille clockwise until the front grille alignment mark aligns the rear grille right alignment mark. Make sure the grilles are securely fastened. 11 Connect the power cord to the power port on the base and then plug it into an electrical outlet. When you hear a beep, the fan is successfully connected to the power supply.
13 Rear Grille Right Alignment Mark Rear Grille Lef Alignment Mark Front Grille Alignment Mark Front Grille Alignment Mark Turning On Turning On/Off Top View before Fastening the Front & Rear Grille Top View afer Fastening the Front & Rear Grille Press the buton to start the fan. When turned on for the first time, the default speed is slow (1) and the mode is direct breeze. Turning Off Switching Speed/Mode Press the buton to stop the fan while it is running. 11 13 Switching Speed Press the buton to adjust the speed, and the corresponding indicators will light up (see table below). Afer the fan is turned off and turned back on again, the speed will be the last used one. Step 6:
Fasten the front grille Insert fan grille screw into the hole at the botom of the fan grille. Turn the screw clockwise by using the included hex key to tighten it. 8 8 7 6 Note: means the indicator is on; means the indicator is off. 7 Speed Slow (1) Medium (2) Fast (3) Turbo (4) Indicator