EN lighting, pumping, ventilation, shutter operations or in Communication Cable and Expansion Module: switching cabinets. The possible uses are diverse, and these are just a few possibilities. xLogic: RS232 communication cable (Model: ELC-RS232) Using the RS485 bus and Ethernet connectivity allows the It is a serial cable with photoelectric isolation which can user to realize various extensive (real-time) monitoring be directly connected to a standard 9-pin port of PC. This and control applications. enables the user's program to be downloaded into xLogic Special versions, without operator LCD and display unit, CPU through xLogicsoft.
are available for series production applications in a small It can also serve as a connection cable between CPU and machine, installation and cabinet building environments to further reduce cost. third-party devices with an RS232, such as HMIs, PLCs, etc. in a Modbus communication system. xLogic Devices xLogic: USB communication cable (Model: ELC-USB). xLogic Basic is available in two voltage ranges. It is a communication cable with photoelectric isolation *DC Range: 12-24 VDC i.e.: PR-6DC, PR-12DC, PR-14DC, through which PC with USB port can be connected to xLogic CPU module, moreover, it has same features as the PR-18, PR-24DC, PR-26DC and EXM-12DC series.
ELC-RS232 module, so it is quite convenient for users whose computer has no standard serial port. *AC Range: 110-240 VAC i.e.: PR-6AC, PR-12AC, PR-14AC, PR-18AC, PR-24AC, PR-26AC and EXM-8AC series. xLogic: PRO-RS485 cable (Model: PRO-RS485). * Without LCD Display: PR-6 series and with “-E” model, It is a serial converter cable with photoelectric isolation, which converts the CPU RS232 programming port to an such as PR-12DC-DA-R-E. isolated RS485 port. PR-18, PR-24, PR26 and EXM models all have an LCD display. xLogic: RS485 module （ Model ： PR-RS485 ） Expansion modules:
An isolated RS485 converter providing terminals of RS485 port for PR-14, PR-18, ELC-22-N and PR-24 series CPUs PR-E (for use with PR-14, ELC-22-N, PR-18, PR-24, PR-26 for connection with third-party devices. and all PR-Ethernet CPUs). Communication / Network EXM-E (for use with all EXM CPUs. xLogic offers different ways to communicate within a system. * xLogic digital expansion modules are available in 12/24 VDC and 110/240 VAC versions and have eight inputs and RS485 port eight outputs. The RS485 port is used for communication between the CPU and various devices or equipment which have a * xLogic analogue expansion modules are available in standard RS485 port.
Communication is via the Modbus 12/24 VDC only and have up to six digital and 4 analogue inputs. RTU/ASCII protocol. Programmable Relay ● User Manual for ELC, EXM and PR Series 18 2020 v6.0 ● © Rievtech Co.,