No. 20S125-00 [Usage instruction] [Maintenance] [Disposal] STC-HD213DVN-B / STC-HD213SDIN-B Product Specifications and User’s Guide 5/89 Caution The camera housing is not connecting to 0 V line of camera inside circuit. There is a risk of short circuit between camera inside ciurcuit and frame ground through other devices. This will cause of malfunction. It is necessary to wiring and mounting that is specified in the specifications for this camera. This will cause of fire or malfunction. It is necessary to wiring with turn off the camera. This will cause of electrification or malfunction. It is necessary to mounting the camera without stress for the cable.
This will case of electrification or fire. Warning Do not touch the terminal and PCB board While turn on the camera. This will cause of electrification or accident caused by malfunction. Do not put combustibles near the camera. This will cause of fire. Do not use without usage that is specified in the specifications for this camera. This will cause of personal injury or malfunction. Do not push metals including screw driver into radiation holes. This will cause of electrification or malfunction. Caution Do not push contamination into opening of the camera. This will cause of electrification or malfunction. Do not block the radiation holes.
This will cause of fire due to increase the camera inside temperature. Caution Do not disassemble or repair the camera. This will cause of fire, electrification or malfunction. It is turn off the camera when maintaining or inspecting the camera. This will cause of electrification. Caution It is necessary to dispose of accordance with WEEE directive.