5. Pry out and pop up the right end of the icon window cover at the plug-in module slot, then pop off the cover. Icon Window Cover Hinge Cover (2) Figure 2-7. Removing the Hinge Covers and Icon Window Cover 6. Remove the icon PCA by doing the following: • Unplug the IR/icon cable near the right end of the icon PCA. • Remove the screw from the left end and lift up the PCA. • Unplug the cable from the motherboard. 7. For the LCD cable emerging from the left hinge, remove the screw from the grounding lug inside the base assembly. For a 12-inch display, also remove the second screw holding the LCD cable. Then unplug the cable from the base assembly. 8.
For the inverter/MB cable emerging from the right hinge, unplug the cable from the motherboard. 9. Remove the four screws from the hinges, and lift off the display assembly. 2-10 Removal and Replacement HP OmniBook 2100/3000/3100