3-24 Troubleshooting and Diagnostics HP OmniBook 2100/3000/3100 Serial Port Sets how the serial port is configured by the BIOS (specified Enabled or automatic). Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4 (COM1) Infrared Port Sets how the infrared port is configured by the BIOS (specified Disabled or automatic). Mode Sets the hardware to support SIR (Standard IR), ASK IR SIR (amplitude shift keyed IR), or FIR (Fast IR) infrared communications. (Driver installation required.) Base I/O address Sets the I/O address and interrupt. 2F8h, IRQ3 (COM2) DMA channel For Fast IR mode, sets the DMA channel.
DMA3 Parallel Port Sets how the parallel port is configured by the BIOS (specified Enabled or automatic). Mode Sets the port to normal, bi-directional, EPP, or ECP. ECP Base I/O address Sets the I/O address. 378h Interrupt Sets the interrupt. IRQ7 DMA channel For ECP mode, sets the DMA channel. DMA3 Audio Sets how the audio system is configured by the BIOS Enabled (specified or automatic). SB I/O address Sets the Sound Blaster I/O address. 220h WSS I/O address Sets the Windows Sound System I/O address. 530h AdLib I/O address Sets the AdLib synthesizer I/O address. 388h Interrupt Sets the interrupt. IRQ5 1st DMA channel Sets the DMA channel for playback.
DMA1 2nd DMA channel Sets the DMA channel for recording. DMA0 OmniBook 3000: Sets how the MIDI capability is configured: by the BIOS Disabled MPU Device (specified settings or automatic) or by a PnP operating system. The port replicator provides a MIDI port, but the OmniBook does not. OmniBook 3000: Sets the MIDI I/O address. 330h MPU I/O address OmniBook 3000: Sets the interrupt. IRQ9 Interrupt Security Menu Default OmniBook 2100/3100: Shows if a user password is set. Clear User Password Is OmniBook 2100/3100: Shows if an administrator password is set. Clear Administrator Password Is OmniBook 2100/3100: Press ENTER to set, change, or clear user password.
Set User Password Password length can be no longer than 8 characters, 0-9, A-Z. OmniBook 2100/3100: Press ENTER to set, change, or clear administrator password. Set Administrator This password protects BIOS Setup settings. Password OmniBook 3000 only: Shows whether a password is set. Clear System Password is OmniBook 3000 only: Press ENTER to set, change, or clear the password. Set System Password Password length can be no longer than 8 characters, 0-9, A-Z. Boot Sets whether a user password is required when the computer OB 2100/3100: boots. Enabled OB 3000: Disabled