Making Connections Using OmniBook Plug-In Modules To replace a plug-in module Important If you are inserting or removing a CD-ROM drive, floppy drive, or Zip drive, shut down the OmniBook. 1. From the Start menu, shut down the OmniBook. (This is not necessary if you are removing a battery from the plug-in module bay and inserting another battery.) 2. Slide the safety latch for the plug-in module bay into its recess. 3. Slide and hold the release latch, then pull out the module, as shown. 4. Slide the new plug-in module into the OmniBook until it clicks into place. C A U T I O N Be sure the safety latch is open before you insert the module.
Otherwise, the release latch could break if you force the module in. 5. Close the safety latch. 4-4