Removing a RAM Board (User-Replaceable) Table 2-4. RAM Board Replacement Part Numbers Caution Handle the RAM board only by its edges and provide proper grounding. Otherwise, you may damage the board due to electrostatic discharge. Required Equipment • None. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. 2. Turn the unit bottom side up and unsnap the RAM cover. 3. Release the two metal latches at the sides of the RAM board, so the free edge of the board pops up. 4. Pull the board out of the connector. Figure 2-2. Removing a RAM Board Reassembly Notes • Insert the RAM board into the connector at about a 30° angle until it is fully inserted.
Then press down at both sides until both latches snap closed. • If only one RAM board is present, you can install it in either connector. 2-4 Removal and Replacement HP OmniBook 7100 Description Part Number Exchange Part Number RAM board, 32-MB 1818-7413 F1456-69001 RAM board, 64-MB 1818-7414 F1457-69001