25. Repeat steps 10 – 18 from the Output Tag Set, selecting a memory area that does not conflict with the Consumed Tag Sets, such as CIO 600. 26. Once both connections are made, click Regist. 27. After clicking Regist, the software assumes you want to make a second connection. Click Close, and OK. 28. Right click on the PLC, and select Parameter, Download, and Yes to start the download. 29. Depending on the mode, you may be prompted to change to program, or download with the current mode. Follow the prompts to complete the download. 30. When the download is complete, check the EIP card for status LEDs.
Errors will be shown, and you should follow the EtherNet/IP Error Code Decoder for troubleshooting tips.