3.4 Operation Method The operation method can be set via communication, control terminals and digital keypad. Revision 2016/03, 6ELE, V1.14 3-3 Operation Method Frequency Source Operation Command Source Operate from the communication When setting communication by the PC, it needs to use VFD-USB01 or IFD8500 converter to connect to the PC. Refer to the communication address 2000H and 2101H setting for details. Operate from external signal +24V FWD/Stop MI1 Factory setting: REV/Stop NPN Mode MI2 NPN Factory Multi-step 1 MI3 Sw1 setting Multi-step 2 MI4 PNP Multi-step 3 MI5 Multi-step 4 MI6 Digital Signal Common DCM E * Don't apply the mains voltage directly to above terminals.
+10V 3 Power supply Factory setting: +10V 3mA ACI Mode 5K 2 AVI AVI Master Frequency Sw2 1 0 to 10V 47K ACI/AVI ACI 4-20mA/0-10V ACM Analog Signal Common E MI3-DCM (Set Pr.04.05=10) MI4-DCM (Set Pr.04.06=11) External terminals input: MI1-DCM (set to FWD/STOP) MI2-DCM (set to REV/STOP) Operate from the digital keypad