Removing the Display Assembly (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. • Plastic knife or small flat-blade screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Open the display completely (180 degrees). 3. Use a plastic knife or small flat-blade screwdriver to gently pry up the right side of the keyboard cover. 4. Remove the cover by pulling it to your right. 5. Use a Phillips screwdriver to remove the four screws from the hinge covers. 6. Remove the hinge covers with your fingers. Do not use a tool. 7. Unplug the cable by grasping both ends of the connector and pulling toward you. 8.
Use a Phillips screwdriver to remove the four screws from the hinges. “Step 5” screws (4): M2.5Ч4mm “Step 8” screws (4): M2.5Ч5mm Figure 2-7. Removing the Display Assembly Reassembly Notes • You may need to use a flat-blade screwdriver to reconnect the cable. HP OmniBook XE2 Removal and Replacement 2-11