Air Conditioner Operation WARNING To reduce the risk of fire, electrical shock, personal injury or property, read the SAFETY PRECAUTIONS before operating this appliance. NOTE Operating Instructions The cooling m ode has an auto m atic 3 m inutes ti m e delayed start if the unit is turned off and on quickly. This prevents overheating of the co m pressor and possible tripping. TO BEGIN OPERATING THE AIR CONDITIONER, FOLLOW THESE STEPS: 1. Set the lowest number (coldest setting). 2. Set the selector control to the highest COOL setting. 3. Adjust the louver for comfortable air flow (see Air Directional Louvers). 4. Once the room feels colder, adjust the setting you find most comfortable. 5.
Make sure that the air flow inside and outside are not obstructed by anything. 6. This air conditioner is designed to be operated under the following conditions: NOTES • The relative hu m idity of roo m should be less than 80%. If the unit is used in a condition with a relative hu m idity over 80%, there will be condensed water on the surface of the unit. • Perfor m ance m ay be reduced outside of these operating te m peratures. Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit control panel alone or with the remote controller.
Page 10 Cooling Operation Outdoor temp.: 64-109°F/18-43°C (64-125°F/18-52°C for special tropical models) Indoor temp.: 62-90°F/17-32°C Heating Operation Outdoor temp.: 23-76°F/-5-24°C Indoor temp.: 32-80°F/0-27°C