Displays: TIMER: AUTO START/STOP FEATURE: • When the unit is on or off, first press the Timer button. The TIMER ON indicator light illuminates indicating the Auto Start program has initiated. Displays • When the time of TIMER ON is displayed, press the Timer button again. The TIMER OFF indicator light illuminates. It indicates the Auto Stop Shows the set temperature in “°C” or “°F” and the Auto-timer settings. While on Fan Only mode, it shows the room temperature. Operating Instructions ) or DOWN AS - Room temperature sensor error - Unplug the unit and plug it back in. If error repeats, call for service. NOTE: In Fan Only mode, it will display “LO” or “HI.” Error codes:
ES - Evaporator temperature sensor error - Unplug the unit and plug it back in. If error repeats, call for service. or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop timed program. NOTE If the unit shuts off unexpectedly due to the power outage, it will restart with the previous function setting auto m atically when the power resu m es. • If setting ON 0.5 and OFF 1 at the same time, the unit will be activated in 0.5 hour, operates for 0.5 hour and then stops. Page 1 4 program h Press or ho ( ) butt by 0.5 hou on to r incr change th ements, up crements u ol will coun until start. e will regis he system vert back t ature setti en the unit ere is no di ON or OFF