Installation Instructions Page 1 9 WARNING - Before You Begin Your air conditioner is designed to install in standard double hung windows with opening widths of 23 to 36 inches (584mm to 914mm) (See Fig. D). Fig. D OFFSET EXTERIOR WALL INNER H WINDOW SILL Instructions Installation INTERIOR WALL Wooden Windows Table 1 Model 5000 6000~800010000~12 000 15000 BTU/h BTU/h BTU/h BTU/h 13” 14” 15-1/2” 18-1/2” H (330mm) (356mm) (394mm) (394mm) Tools You Will Need Phillips Screwdriver Level Tools You May Use Flathead Screwdriver Pencil Ruler or tape measure Scissors or knife Read these instructions completely and carefully. • IMPORTANT - Save these instructions for local inspector’s use.
• IMPORTANT - Observe all governing codes and ordinances. • Note to Installer - Be sure to leave these instructions with the consumer. • Note to Consumer - Keep these instructions for future reference. • Skill level - Installation of this appliance requires basic mechanical skills. • Completion time - Approximately 1 hour. We recommend that two people install this product. Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the Warranty. You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Do not change the plug on the power cord of the air conditioner. Aluminum house wiring may present special problems - consult a qualified electrician. When handling unit, be careful to avoid cuts from sharp metal edges and aluminum fins on front and rear coils. Flathead Screwdriver Pencil Ruler or tape measure Scissors or knife del 5000 600 BTU/h B 13” (330mm) (35 0~8000 TU/h 10000~12 00 BTU/h 14” 6mm) 15-1/2” (394mm)