Choosing a location Safety Instructions Features Operation Requirements Installation Instructions Washer Care Troubleshooting Washer Use WARNING Do not install your washer in ares where water may freeze, because your washer always retains some water in its water valve, pump and hose areas. Frozen water can damage the valve, pump, hoses and other components. Never install on a platform or weakly supported structure. For best performance, you must install your washer on a solid, level floor. Wooden floors may need to be reinforced to minimize vibration or unbalanced load situations.
Carpeting and soft tile surfaces can contribute to excessive vibration, which can cause your washer to move slightly during the spin cycle. Washer dimensions and installation measurements 105 cm 64 cm 16 * Required spacing 42.2 in. 25.2 in. 58 in. 147 cm 27 in. 68.4 cm