5. Insert the drain hose with the clamp onto the washer's drain pipe. Make sure that the drain hose completely covers the end of the drain pipe. Safety Instructions Features Operation Requirements Installation Instructions Washer Care Troubleshooting Washer Use Caution Make sure that the connection between the drain hose and the wash basin, standpipe or laundry tub is not airtight. 0ver the edge of wash basin - Secure the guide to the side of the basin wall with a hook, tape it or tie it with a piece of cord to prevent the drain hose from moving. In a standpipe - The standpipe must be no shorter than39 in. (99 cm) and no longer than 96 in. (244 cm). Hose retainer Tie strap 23