CHANGE THE DRYER VENT LOCATION Your new dryer is shipped to vent to the rear. It can also be configured to vent to he bottom or left side (as seen from the front). Dryer Safety An Adapter kits which are standard components can be purchased from any retailer . This kit contains the necessary duct components to change the dryer vent location . Operation Requirements Tools and materials you will need Parts and Features Rigid or UL-listed aluminum tape Phillips screwdriver 4'' (10.2 cm) duct flexible metal Elbow 4'' (10.2 cm) Gloves Installation Instructions Dryer Use Appendix Dryer Care Troubleshooting 1 . Remove the two rear exhaust retaining screws, then pull out the exhaust duct .
Retaining Screw Rear Exhaust Duct Option 1: Side venting 2 . ress P the tabs on the knockoutand carefully remove the knockout for the desired ventopening . Attach the adapter duct onto the blower housing of the dryer as shown . Adapter Duct 30 Knockout