Downloaded from https://www.everyspec.com APPENDIX C MIL-STD-31000A Effects of condition on CAD data quality for manufacturing: The assembly definition is incomplete. Recommended correction: Locate and add the missing part model file to the assembly package or remove the part instance from the assembly definition. C.7.9 Annotation quality criteria Intrinsic annotation errors are incorrect regardless of whether the model is in its native format or is a derivative translated from another system. The following are examples of intrinsic annotation errors. C.7.9.1 Non-Graphical Annotation (A-AN-NG) Definition:
The semantic representation of an annotation has no corresponding presentation graphics. Measurement: The criterion is false if any occurrences of this condition exist in the model pair. Effects of condition on CAD data quality for manufacturing: This condition causes definition of the model to be incomplete for downstream processes which rely on the visual (human) consumption of annotation information. Recommended correction: Create the presentation graphics for this annotation. C.7.9.2 Unviewed Annotation (A-AN-UV) Definition: An annotation is not included in a saved view. Measurement: The criterion is false if any occurrences of this condition exist in the model pair.
Special consideration may need to be given to “banner” annotations which are intended to be visible at all times, independent of which saved view is active. Effects of condition on CAD data quality for manufacturing: This condition causes confusion when for downstream processes which rely on the visual (human) consumption of annotation information and expect all annotations to be visible in at least one saved view. Recommended correction: Assign this annotation to a saved view. 125