Downloaded from https://www.everyspec.com MIL-STD-31000A APPENDIX B All models should have the following notes to accommodate MBD: Note Name Description of Note Banner A fixed note such as your company name or other indicator such as Top Secret Site_Map Note/s identifying all available combination views Notice ITAR notice or other classified specific restricted data information Legal Competition sensitive, government rights and/or distribution statement Proprietary Company proprietary information Title_Block Company name, part number, revision, date, part description, cage code and/or contract number.
Define as parameters Design_Signatures Designer name, design approval record, engineer name, engineer release record, checker name, check date. Define as parameters Block_Tolerances Format type, format units, 1 place tolerance, 2 place tolerance, Angle tolerance. Define as a parameter for extraction and reuse. Material Material specification, coating, heat treating, unit weight, mass units, material engineer record. Define as a parameter for extraction and reuse. Finish Finish specification, preparation call out, paint note, etc. Define as a parameter for extraction and reuse. Notes Originator specific notes including:
ASME Y14.41, model query note - When model query is required, a notation stating the requirement for query of the model or associated data should be added to the general notes (per ASME Y14.41, sec 3.1.1, 5). Values queried from the model for any feature(s) without any tolerance or datum target specifications assigned should be reference dimensions (per ASME Y14.41, sec 3.1.1, 8). 46