Downloaded from https://www.everyspec.com MIL-STD-81OC ,e. Duration of test. Method for monitoring test item during test. g. Operating parameters to be monitored. h. Allowable deviation from specified tolerances. i. Coupling of radio frequency outputs to dumniyloads. j. Substitution of power source having volt-ampere characteristicssimilar to the vehicle’s primary power supply. Emission of fuels and oxidizers. .1. Statement of reliability and failure criteria. m. Peripheral heating and cooling devices to maintain proper conditions of ,equipment under test until flight conditions are established. Aerodynamic heating simulation requirement. Vehicle surface emissivity and absorptivity. P.
Vehicle thermal balance computations. 4 Minimum heating conditions (i.e., the coldest condition which is often the most difficult to ~chieve). r. Auxiliary power to supplement power requirementfor ~under test. chamber and equipment s. Other applicable requirements. 3.2 Simulator performance parameter validation. The instrumentperformance chart, table 517.2-V, indicates the level of performance required of instruments for indicated parameters: absolute accuracy, reproducibility y: response time, view angle, discriminationor sensitivity, and miscellaneous Items for the evaluation of solar simulation. 517.2-6 METHOD S17.2