Downloaded from https://www.everyspec.com MIL-STD-81OC 3. Establish the cycling range for each sinusoid. fl = t .2(f1) = i .2(70) = 56 to 84 Hz f2 = * .2(f2) = f .2(140) = 112 to 168 HZ f3 = t .2(f3) = t .2(210) = 168 to 2S2 Hz f4 = t .2(f4) = t .2(280) = 224 to 336 HZ Note that the low end of the cycling range (fl - .2f1) is S6 Hz and is also the low end of the low frequency random spectrum (see 3.3.4.3 and figure 519.2-1’1). 7.1.5 Determination of the high frequency random surface, Gr. Refer to figure 519.2-3 and at the intersectionsof f/fo, and D = 48 inches record the following values of Gr. Note that = 900 Hz (see 3.3.4.2). 0- f Gr (dB re.
G~r) Ga = 13.93 g2/Hz or 1 .7 630 - 13.7 = .594 g2/Hz f/f .89 800 - 16.2.= .334 g2/Hz 1.0 900 - 18.2 = .205 g2/Hz 1.11 1000 - 20.1 = .135 g2/Hz 1.39 1250 - 24.0 = .060 g2;Hz 1.78 1600 - 29.2 = .056 g2/Hz 2.22 2000 - 33.5 = .006 g2/Hz ..MakeGr ~a the reference value by subtracting it from all the values of Gr. METHOD 519.2 519.2-18