Downloaded from https://www.everyspec.com MIL-STD-810C Step 5 - Operate and inspect the test item in accordance with General Requirements, 3.2. Step 6 - Inspect the test item and obtain results as specified in General Requirements, 3.2.4. In the performance of this inspection, test items containing bearings, grease seals, lubricants, et cetera, shall be carefully examined for the presence of dust deposits. 4. SUMMARY. The following details shall be as specified in the equipment spec~on: a. Pretest data required b. Failure criteria c. Change in orientation during test.if required d.
Whether equipment is to operate during test and length of time required for operation and measurements (see steps 1 and 3) e.: Whether the second 6-hour test at 63° C (145”F) shall be performed inunedi- ately after reaching stabilization (see step 2) f. Temperatures for steps 2 and 3, if different from 63°C (145”F). 510.1-3 METHOD 510.1