Downloaded from https://www.everyspec.com 19 JUIY ‘1983 O MI~-STD-810D: . Step 5. Maintain the 30° C (860F) and & relative humidity for an additional 8 hours. Step 6. Repeat steps 2, 3, and 4 for a total of 10 cycles (not less than 240 hours). Step 7. Near the end of the fifth and tenth oyoles, while still at 30° C (860F) and 951 relative humidity, operate the test item and obtain”and reoord results in accordance with General Requirements. . 11-4 ~ a. Previous test methods to which the test item has been subjected. b. . Results of each performance check (pre-; during, and post-test) and visual examination (and photographs, if applicable). c.
Length of.time required for each perfo?mance check. d.””Procedure and test levels used. e.. Exposure durations. f. Time versus temperature and humidity. ,. !. o ,,. . METHOD 507.2 ,507.2-17“:. 19 July 1983