Downloaded from https://www.everyspec.com MIL-STD-81OD 19 July 1983 I-4.1 Failu e criterti. r In addition to the failure criteria of General Requirements, 4.5.7, the following must be considered: Any corrosion must be analyzed for its immediate or potential effect on the proper functioning of the test item. Satisfactory operation following this test is not the sole oriterion for pass/fail. .,:,; .. . I-4.2 ~. The following information is: : required in the test plan for the adequate oonduct of the test.of seotion II’. . a. Test duration. ,:. , b. Test item configuration. . . 0. Cyolio conditions (if required). ,, d. Salt concentration if other than 5%..: .....! e. Additional guidelines. ,.
I-5 .,., ,. a. AR 70-38, Development. Teat ~ of Me&riel for ~. ,,, .-...: b. MIL-STD-21O, ~emes for Mij,itarv~. .. o ,., . Army Materiel CouinandPamphlet AMCP-706-I16, ~ Ji.ar@&, ~. .,. , ,. ’.,( . .. .: ,- .,. . . ., .,. ~ . . . . . . ,-, .,, METHOD 509.2, 19 JUIY 1983 ,. 509..2-4