[PRECAUTIONS FOR USING A DATA STORAGE] CAUTION If the data storage is removed from the GOT while being accessed by the GOT, the data storage and files may be damaged. Before removing the data storage from the GOT, check the SD card access LED, system signal, or others to make sure that the data storage is not accessed. Turning off the GOT while it accesses the SD card results in damage to the SD card and files. When using the GOT with an SD card inserted, check the following items. [GT27, GT25 (except GT2505-V and GT25HS-V), GT23, GS25] After inserting an SD card into the GOT, make sure to close the SD card cover. Otherwise, data cannot be read or written.
[GT2505-V, GT25HS-V] After inserting an SD card into the GOT, make sure to turn on the SD card access switch. Otherwise, data cannot be read or written. [GT21] After inserting an SD card into the SD card unit, make sure to enable the SD card access in the GOT utility. Otherwise, data cannot be read or written. When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop out. Not doing so may cause the SD card to drop from the GOT, resulting in a failure or break. When inserting a USB device into a USB interface of the GOT, make sure to insert the device into the interface firmly. Not doing so may cause a malfunction due to poor contact.
(GT27, GT25, GT2107-W, GS25) Before removing the data storage from the GOT, follow the procedure for removal on the utility screen of the GOT. After the successful completion dialog is displayed, remove the data storage by hand carefully. Not doing so may cause the data storage to drop from the GOT, resulting in a failure or break. 11