[PRECAUTIONS FOR REMOTE CONTROL] WARNING Remote control is available through a network by using GOT functions, including theSoftGOT-GOT link function, the remote personal computer operation function, the VNC server function, and the GOT Mobile function. If you remotely operate control equipment using such functions, the field operator may not notice the remote operation, leading to an accident. In addition, a communication delay or interruption may occur depending on the network environment, and remote control of control equipment cannot be performed normally in some cases.
Before using the above functions to perform remote control, fully grasp the circumstances of the field site and ensure safety. When operating the server (GOT) of the GOT Mobile function to disconnect a client, notify the operator of the client about the disconnection beforehand. Not doing so may cause an accident. [PRECAUTIONS FOR EXCLUSIVE AUTHORIZATION CONTROL] WARNING Before using the GOT network interaction function to prevent simultaneous operations from multiple pieces of equipment, make sure you understand the function. You can enable or disable the exclusive authorization control of the GOT network interaction function for each screen.
(For all screens, the exclusive authorization control is disabled by default.) Properly determine the screens for which the exclusive authorization control is required, and set the control by screen. A screen for which the exclusive authorization control is disabled is operable simultaneously from multiple pieces of equipment. Make sure to determine the operation period for each operator, fully grasp the circumstances of the field site, and ensure safety to perform operations. [DISPOSAL PRECAUTIONS] CAUTION When disposing of this product, treat it as industrial waste. When disposing of batteries, separate them from other wastes according to the local regulations.
(Refer to GOT2000 Series User's Manual (Hardware) for details of the battery directive in the EU member states.) 13