HOW TO ADJUST THE LOUVER CHECK INDICATION, FILTER SIGN UP AND DOWN ADJUSTING How to move swing louver Press AIR FLOW button when the air conditioner is in operation. The swing louver moves up and down, and the display moves too. WHEN SHORT FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW) Light for 0.5 second, wink out for 0.5 second NOTICE „ Something is wrong with the air conditioner. Immediately after the timer/check indicator lamp flashes (light for 0.5 second, wink out for 0.5 second), the air conditioner stops. Address No. and error code are shown on the display on the indoor unit. The monitor display is turned off after the display time.
When nothing is displayed on the monitor, operate the remote control or press the BACKUP button resume. The actual movement of swing louver and that of display are not synchronized but this is not a failure. continuous movement of display „ Please tell your dealer “address No. and error code”, “symptom of the trouble”, “air conditioner type” and “model name” etc. Press ON/OFF button to stop the unit. NOTICE For FDTW, FDK and FDFW , address No. is not shown on display. WHEN LONG FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW) Light for 2 seconds, wink out for 1 second „ Clean the filter. See page 16.
17 When cumulative running time reaches amount number of hours, long flashing light (light for 2 seconds, wink out for 1 second) is shed from the timer/check indicator lamp (yellow). After cleaning of filter, press the FILTER button on the remote control to turn off the filter cleaning sign. (Press the button for one second or more) NOTICE The cumulative running time for filter sign can be changed. Consult your dealer for more information. Detail of display Follow the instruction mentioned below according to the indoor unit type.
J Ceiling cassette-4 way-(FDT) Ceiling cassette-4 way Compact (600Ч600mm)-(FDTC) J Ceiling suspended (FDE) Do not set the position of the swing louver downwards for a long time. Dew formation on the side panel may drop.
(in case of FDE) ATTENTION FOR COMFORTABLE USE TIMER CHECK RUN See page 12 Check monitor Timer/check Indicator lamp Check monitor Timer/check Indicator lamp J Ceiling cassette - 2 way (After FDTW-KXE6F) J Floor standing -2way- (FDFW) 点検LED Check indicator lamp CHECK1 CHECK2 TIMER/CHECK RUN Timer/check Indicator lamp Timer/check Indicator lamp Check indicator lamp J Wall mounted (FDK) RUN TIMER/CHECK CHECK1 CHECK2 Check indicator lamp Timer/check Indicator lamp For FDTW, FDK and FDFW, check indicator lamp “check1” / “check2” shows error code. The number of blinking shows the error code number of tens/ones place and check1/check2 corresponds to tens/ones place.
NOTICE 15 To fix the position of the swing louver Press AIR FLOW button when the louver position indication comes to the position where you would like to fix it. • Auto swing display stops at the position and then the swing louver stops and be fixed. NOTICE Press the button and auto swing display stops immediately, then the swing louver stops later, but this is not a failure. (Auto swing display and the actual louver movement of the air conditioner are not synchronized) The swing louver movement during heat preparation When “heat preparation” is displayed, the position of the swing louver sets horizontal automatically.
(The display of remote control keeps the set position) When heat preparation ends and normal operation starts, the position of the swing louver returns to the set position. horizontal position Recommended air frow direction position (when fixed) A COOL DRY B AUTO C HEAT D horizontal position A B C D