Inspection/Cleaning Procedure Inspecting the Emergency Stop Button and Emergency Pull- Wire Switch Check that the emergency stop button and the emergency pull-wire switch operates normally. For detailed procedures, refer to the "Operation Guide". Inspect the Open Cover Detection Check that the cover open detection function on the front/rear side is operating normally. For detailed procedures, refer to the "Operation Guide". Inspect for Leaks in the Ink Path Check for ink leaks in each ink path. Check for ink leaks or runs around the connections between the heads and tubes, and around the print heads. For detailed procedures, refer to the "Operation Guide".
Checking the Air Filter of the Air Supply Regulator Check the air filter of the air pressure supply regulator for dust and water. For detailed procedures, refer to the "Operation Guide". 16 Frequency Everyday Inspection before beginning work User Permissions L Personal Protective Equipment Protective gloves and clothing Frequency Every shift Inspection before beginning work User Permissions L Personal Protective Equipment Protective gloves and clothing Frequency Everyday User Permissions L Personal Protective Equipment Protective gloves and clothing Frequency Everyday User Permissions L Personal Protective Equipment Protective gloves and clothing