For Safe Usage Handling Precautions for Ink Cartridges (10L) For 10L ink cartridge model. 20 CAUTION Do not touch the IC chip on the cartridge. Store ink cartridges within the indicated temperature range. Do not store them in high or freezing temperatures. Do not use reactive ink, acid ink, dispersion ink, and pigment ink at the same time (including ink penetration liquid). Before installing, stir ink with the following procedures. However, stirring is not needed for ink penetration liquid and cleaning liquid. 1. Place the ink cartridge with the ink supply port facing the side, and slide the ink cartridge back and forth longitudinally within the range of approximately 10 cm for ten times.
Move the ink cartridge at a rate of one back-and-forth cycle per second. 2. Turn over the ink cartridge and repeat the same cycle for ten times. Dispose of used cartridge according to local laws and regulations. Epson recommends the use of genuine Epson ink cartridge. Epson cannot guarantee the quality or reliability of nongenuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior. For more information about the warranty for this machine, please refer to the Delivery Specifi- cations.
This machine is designed to stop operating before the ink completely runs out, in order to maintain the quality of the print head. Therefore, a small amount of ink will remain in used ink cartridges. The running cost will vary by usage environment and usage condi- tions.