For Safe Usage Notes When Not Using the Printer • A service engineer must do pre- and post-maintenance when the printer is not used for over 6 weeks. Pre- and post-maintenance will be provided for a fee. During pre-maintenance, the ink in the ink tubes is removed, and the inside of the tubes is washed using the cleaning fluid in the cleaning cartridge, to prepare for long-term storage. When restarting use of the printer, recharge the printer with ink. Moreover, depending on the environment and length of time stored, repairs may be required during post-maintenance even if pre- maintenance is done. If repairs are necessary, they will be done for a fee. Contact qualified service personnel.
• Depending on the type of ink, you may need to remove and shake the ink cartridges installed in the machine if they have not been used for a long period of time. For more information, refer to the User’s Manual. Regular Replacement Parts for Maintaining Safety The front cover hinges should be checked during daily inspections and replaced after the indicated number of years have passed. Continuing to use this product without replacing the hinges could lead to injury if a front cover falls. When the number of years indicated for replacement have passed, contact qualified service personnel. For more information, refer to the User’s Manual. 15