Super Micro X7SBU Motherboard User & Service Manual PDF (EN)

X7SBU USER’S MANUAL Revision 1.0b

Стр. 1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPER MICRO COMPUTER, INC. "Supermicro" reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supericro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0b Release Date: August 19, 2009. Unless you request and receive written permission from the Manufacturer, you may not copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2009 All rights reserved. Printed in the United States of America

Стр. 2

Preface Preface About This Manual This manual is written for system integrators, PC technician and knowledgeable PC users. It provides information for the installation and use of the X7SBU motherboard. The X7SBU supports single Intel ® Xeon ® 3000 sequence/Core TM 2 Extreme/Core TM 2 Quad/Core TM 2 Duo processor with a system bus speed of 1600 MHz/1333 MHz/1066 MHz and up to 8 Gb Unbuffered DDR3 Non-ECC up to 1333 MHz in 4 DIMMs or DDR3 Non-ECC 1600 MHz up to 4GB in 2 DIMMs memory. The Intel ® Xeon ® 3000 sequence/Core TM 2 Extreme/Core TM 2 Quad/Core TM 2 Duo processor supports the 775-Land Grid Array Package that interfaces with the motherboard via an LGA775 socket.

With support of Dual-Core TM Technology, Intel ® Hyper-Threading (HT) Technology, Wide Dynamic Execution, FSB Dynamic Bus Inversion (DBI), Advanced Digital Media Boost, Smart Memory Access, and Thermal Management 2 (TM2), the X7SBU delivers unparalleled system performance and great power efficiency in a slim package. Please refer to the motherboard specifica- tions pages on our web site (http://www.supermicro.com/Products/) for updates on supported processors. This product is intended to be professionally installed and serviced by a technician.

Manual Organization Chapter 1 describes the features, specifications and performance of the mother- board and provides detailed information about the chipset. Chapter 2 provides hardware installation instructions. Read this chapter when in- stalling the processor, memory modules and other hardware components into the system. If you encounter any problems, see Chapter 3 , which describes trouble- shooting procedures for video, memory and system setup stored in the CMOS. Chapter 4 includes an introduction to the BIOS and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS Error Beep Codes. Appendix B lists the Windows OS Installation Instructions.

Appendix C lists Other Software Program Installation Instructions. Conventions Used in the Manual: Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself: Warning: Important information given to ensure proper system installation, to prevent bodily injury or damage to the components. Note: Additional Information given to differentiate various models or to ensure correct system setup. iii

Стр. 3

X7SBU User’s Manual Table of Contents Chapter 1 Introduction 1-1 Overview.......................................................................................................... 1-1 Checklist.......................................................................................................... 1-1 1-2 Contacting Supermicro.................................................................................... 1-2 1-3 Motherboard Layout......................................................................................... 1-4 X7SBU Quick Reference.................................................................................

1-5 Block Diagram................................................................................................. 1-8 Motherboard Features .................................................................................... 1-6 1-4 Chipset Overview ........................................................................................... 1-9 Memory Controller Hub (MCH)........................................................................ 1-9 1-5 Special Features............................................................................................ 1-10 Recovery from AC Power Loss.....................................................................

1-10 1-6 PC Health Monitoring.................................................................................... 1-10 Fan Status Monitor with Firmware Control ................................................... 1-10 Environmental Temperature Control..............................................................

1-10 CPU Overheat LED and Control....................................................................1-11 System Resource Alert...................................................................................1.11 1-7 ACPI Features................................................................................................1-11 SLow Blinking LED for Suspend State Indicator............................................1-11 1-8 Super I/O....................................................................................................... 1-12 Chapter 2 Installation 2-1 Static-Sensitive Devices..................................................................................

2-1 2-2 Motherboard Installation.................................................................................. 2-2 2-3 Processor and Heatsink Fan Installation......................................................... 2-2 2-4 Installing DIMMs.............................................................................................. 2-7 2-5 Control Panel Connectors/IO Ports................................................................. 2-9 1. Back Panel Connectors/IO Ports................................................................. 2-9 2. Front Control Panel................................................................................... 2-10 3.

Front Control Panel Pin Definitions............................................................2-11 NMI Button.................................................................................................2-11 Power LED.................................................................................................2-11 NIC1/NIC2 LED Indicator........................................................................... 2-12 HDD LED................................................................................................... 2-12 Overheat/Fan Fail LED (OH).....................................................................

2-13 Power Fail LED.......................................................................................... 2-13 iv

Стр. 4