Model-Driven Telemetry Managing Configured Subscriptions Command or Action Purpose Device> enable Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 telemetry ietf subscription id Example: Device(config)# telemetry ietf subscription 101 Creates a telemetry subscription and enters telemetry-subscription mode. Step 4 stream yang-push Example: Device(config-mdt-subs)# stream yang-push Configures a stream for the subscription. Step 5 filter xpath path Example: Device(config-mdt-subs)# filter xpath /memory-ios-xe-oper:memory-statistics/memory-statistic Specifies the XPath filter for the subscription.
Step 6 update-policy {on-change | periodic} period Example: Device(config-mdt-subs)# update-policy periodic 6000 Configures a periodic update policy for the subscription. Step 7 encoding encode-kvgpb Example: Device(config-mdt-subs)# encoding encode-kvgpb Specifies kvGPB encoding. Step 8 source-vrf vrf-id Example: Device(config-mdt-subs)# source-vrf 192.0.2.1 Configures the source VRF instance. Step 9 source-address source-address Example: Device(config-mdt-subs)# source-address Mgmt-intf Configures the source address. Step 10 receiver ip address ip-address receiver-port protocol protocol profile name Example:
Device(config-mdt-subs)# receiver ip address 10.28.35.45 57555 protocol grpc-tcp Configures the receiver IP address, protocol, and profile for notifications. Step 11 end Example: Device(config-mdt-subs)# end Exits telemetry-subscription configuration mode and returns to privileged EXEC mode. Model-Driven Telemetry 43