To prevent injury, a damaged power cord must be replaced by the manufacturer or his customer service or a similarly qualified person. Only our customer service may repair the appliance. en , Safety instructions for this appliance Risk of injury Electric shock risk Do not use the hand blender with damp hands and do not operate it at no load. Do not immerse the appliance in liquid above the blender foot-base unit connection point. Never immerse the base unit in liquids and do not clean in the dishwasher. Caution when processing hot liquids. Liquids may splash during processing. Never place blender foot on hot surfaces or use in very hot food.
Leave hot food to cool down to at least 80 °C before processing with the blender! Operate the hand blender with original accessories only. Do not attach or remove tools until the appliance is at a standstill. Recommendation: Never switch on the appliance for longer as you need to processing the ingredients. Risk of injury from sharp blades/rotating drive! Never grip the blade in the blender foot. Never clean the blades with bare hands. Use a brush. These operating instructions refer to various models. An overview of the different models can be found on the illustrated pages ( Fig. ). Overview Please fold out the illustrated pages. Fig.
1 Base unit 2 Power cord 3 Speed control Operating speed can be adjusted steplessly between the lowest ( ) and highest ( 12 ) speed (only in conjunction with button 4a ). 4 ON button a Controllable speed (with speed control 3 ) b Turbo speed The hand blender remains switched on as long as the On button ( a or b ) is pressed. The turbo speed is used for the universal cutter (if included in delivery). 5 Release buttons To remove the blender foot, simultaneously press both release buttons. 6 Blender foot Plastic or metal (depending on model). Attach the blender foot and lock into position.
7 Blender blade 8 Blender jug with lid Using the blender jug will prevent the ingredients from splashing. Place the lid on the blender jug to keep in the processed ingredients. For some models: 9 Universal cutter with lid 10 Whisk If the universal cutter is not included with the hand blender, it can be ordered from customer service (order no. 657247). With the universal cutter use the appliance at full power to prepare honey spread (according to the recipe). You can find the recipe in the instructions for use of the universal cutter. Place the lid on the universal cutter to keep in the processed ingredients. 4 Robert Bosch Hausgerдte GmbH