Cleaning and servicing en Blender X Figure E Adding more ingredients X Figure E -6 W W Risk of injury from sharp blades / rotating drive! Never place fingers in the attached blender! Do not remove / attach the blender until the drive is at a standstill! Operate the assembled blender only and with the lid attached. ■ ■ Switch off the appliance with the rotary switch. ■ ■ Remove the cover and add ingredients or ■ ■ remove the funnel and gradually add solid ingredients through the feed tube or W W Risk of scalding! If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0.5 litres of hot or frothing liquid. ■ ■ pour liquid through the funnel.
After using the appliance Switch off the appliance with the rotary switch. Warning! Blender may be damaged. Do not process deep-frozen ingredients (except ice cubes). Do not operate when empty. ■ ■ Remove mains plug. ■ ■ Rotate the blender in a clockwise direction and remove. Warning! Processing liquids in the glass blender: maximum setting 3. Add a max. 0.5 litres of hot or frothing liquid. Tip: It is recommended to clean the blender immediately after use. Cleaning and servicing Attention! Do NOT use abrasive cleaning agents. Surfaces may be damaged. Cleaning the base unit ■ ■ Press the Release button and move the swivel arm to position 3 . ■ ■ Remove the blender drive cover.
■ ■ Attach the blender jug (mark on the base of the blender jug on the mark on the base unit) and rotate as far as possible in an anti-clockwise direction. X Fig. E -4/5 ■ ■ Add ingredients. Maximum capacity of liquid for plastic blender = 1 litre, for glass blender = 0.75 litres, frothing or hot liquid maximum 0.5 litres Optimal processing capacity – solids = 50-100 g. ■ ■ Attach lid and press firmly. While working, always hold the lid firmly with one hand. However, do not place hand over the refill opening! ■ ■ Set the rotary switch to the desired setting. W W Risk of electric shock! Never immerse the base unit in water or place under running water. ■ ■ Remove mains plug.
■ ■ Wipe the base unit with a damp cloth. If required, use a little detergent. ■ ■ Then dry the base unit. Cleaning the bowl and accessories All parts are dishwasher-safe. Do not wedge plastic parts in the dishwasher as they could warp. Cleaning the blender W W Risk of injury from sharp blades! Do not touch blender blades with bare hands. The blender can be disassembled for cleaning. Warning! Do NOT use abrasive cleaning agents. The blade insert is not dishwasher-safe. Clean the blade insert under running water only. 18 MUM44_8001056867.indb 18 25.01.2017 10:07:03