Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting our after-sales service. This will avoid unne- cessary costs. Malfunctions Fault Cause troubleshooting Processed food does not fall into the bowl. Outlet opening or housing is blocked. 1. Finish processing and unplug from the mains. 2. Remove the accessory. 3. Take the accessory apart and re- move the blockage. Cutting disc does not rotate although the base unit is run- ning. Lid is not fitted and engaged properly. ▶ Check whether the lid is fitted prop- erly.
→ "Assembling the continuous feed shredder", Page 19 Accessory has been over- loaded and the disc holder shaft has broken at the pre- determined breaking point. ▶ You can order a new disc holder from customer service under order number 00630760. 23