Basic operation en Basic operation 6 Basic operation Processing food with the juicer attachment 1 Basic operation Note: When working with the juicer attachment, note the following special features. 6.1 Recommended speeds Observe the recommended speeds for optimum results. Note: Your model is equipped with a 4- or 7-level rotary switch depending on the features of the appliance. The recommended speeds for the 4-level rotary switch are always shown in brackets in these instructions for use. 1. Place two containers under the rel- evant openings. 2. Before starting processing, turn the setting screw anticlockwise and open. → Fig. 32 3.
During processing use the setting Setting Use 7 (4) Meat mincer 7 (4) Juicer attachment 4-5 (2-3) screw to select the desired con- sistency of the fruit purйe and pulp. Viennese whirl attachment 6.3 Removing the attachment 3-4 (2-3) Shredding attachment 1. Remove the filling tray and pusher and open the locking lever. → Fig. 33 2. Rotate the attachment and remove 6.2 Processing food from the base unit. → Fig. 34 1. Prepare your food. Tip: Clean all parts immediately after use so that residues do not dry on. Cut large items of food into pieces so they fit into the filling shaft. 2. Insert the mains plug. 3.
Set the rotary switch to the recom- Cleaning and servicing 7 Cleaning and servicing mended speed. → Fig. 29 4. Insert the food into the filling shaft Cleaning and servicing 7.1 Cleaning products and press down with the pusher, applying light pressure. → Fig. 30 5. Set the rotary switch to . → Fig. 31 Wait until the appliance stops. 6. Unplug the mains plug. Find out here what cleaning agents are suitable for your accessories. ATTENTION! Using unsuitable cleaning agents or incorrect cleaning may damage the accessories. ▶ Do not use cleaning agents con- taining alcohol or spirits. ▶ Do not use sharp, pointed or metal objects. 1 Special accessory 13