３ Basic Settings This chapter describes the basic procedure to create an NA project, to specify communication settings, and to register variables. ３ - １ Adding an NA ３ - １ - １ Adding an NA 15 1. Add an NA to the project. Select [Insert]-[HMI]-[NA5]. Select [Insert]-[HMI]-[NA5]. 2. Select an option from among the list according to the actual unit. For example, if you use a 12-inch model, select “12W001□”. For details on models, refer to Chapter 7. 3. Select the version. 4. An NA is now added, and the display is changed accordingly.