Create the Buttons to switch pages on the “Background” page. object Additional Information For both Click and Release , the event occurs when the object is released, but the operation when the page is changed is different. If the page changes when an object set for Click is touched but not yet released, the event does not occur. If the page changes when an object set for Release is touched but not yet released, the event does occur. 38 ４-６-２ Creating the Buttons to Switch Pages 1. Open the “Background” page. Select from the Toolbox [Buttons]-[Button], and then drag and drop it to the page. Select from the Toolbox [Buttons]-[Button], and then drag and drop it to the page. 2.
Set the Button so that the page is switched when the Button is pressed. Perform settings in [Events and Actions]. Select [View]-[Events and Actions]. If you use the toolbar, click the icon. The [Events and Actions] window appears on the right side of the screen. 3. While selecting the Button object, click the cell indicating Event to Add> to the right of [Events]. 4. Select “Click”. The event occurs at the time of: Click: when you release the object Press: while you are holding down the object Release: when you release the