Importing or Updating the Variables Directly from the Device This is only available if “CIP Ethernet” is selected as [Communication Driver]. You must transfer the variable table to the CPU unit in advance. 38 1. While the CJ-series CPU and the computer are connected via an Ethernet cable, select “Import”. (At this time, it does not matter even if “USB” has been selected for communication setting on the Sysmac Studio side.) computer are connected via an Ethernet cable, select “Import”. (At this time, it does not matter even if “USB” has been selected for communication setting on the Sysmac Studio side.) 2.
The device variables registered in CJ are imported as shown in the [Device Variables] field. 3. In the Multiview Explorer, double-click [Variable Mapping]. 4. As is the case with registration of NJ CPU variables, you can create variables by selecting “Create Device Variable” in the context menu. 5. The variables created in Step 4 are automatically registered in the [Global Variables] tab page.