When “ Error ” appears in the Controller Event Status column on the “Active Events” tab, it means that an error has occurred in the controller. Check for the currently occurring errors following the procedure below. ‘SDCard’.” 12 Active Events – Controller Events 1. When “Error” is displayed in the Controller Event Status column on the “Active Events” tab, press the “Show Controller Events” button at the bottom of the screen. Controller Event Status column on the “Active Events” tab, press the “Show Controller Events” button at the bottom of the screen. 2. The screen is switched to “Controller Events”. A list of the currently occurring controller events is displayed.
Select an event from the list and press “Show Detail” at the right bottom of the screen. 3. The details of the event that is selected in Step 2 appear. You can recover from the problem by referring to what is displayed in “Detailed Information”. 4. In Steps 2 and 3, if you press the “Screen Shot” button, the currently displayed screen can be captured and saved in an SD Memory Card. You can attach the saved image to defect reports. When no SD Memory Card is inserted in NA, if you press “Yes” in the dialog box shown on the right, the following message appears. “Failed to capture screenshot – Could not find the storage media