14 5. The “The error was reset successfully.” Message appears. Press “OK” and then “Back” at the top right of the screen. 6. On the “Active Events” screen, you will find that the event you just cleared has been deleted. 7. As described in Step 3, if you press the “ Show Specified Page ” button in the Details screen of the user event, the page created with Sysmac Studio can be displayed. You can specify the page from [HMI]-[Controller Events]-[User Events] on Sysmac Studio, as described in Step 8 below. 8. Specify the page related to the Troubleshooter as below. Select [HMI]-[Controller Events]-[User Events], and right-click on the edit pane of “User Events” and select [Add]. 9.
Add in [Event Code] the code of In [Event Name/Comment], the ones set in [Event Name] in Step 5 on Page 10 are automatically displayed. the event for which to display the related page, and enter in [Troubleshooter Associated Page] the name of the page to display. The [Event Code] represents the code that is assigned in [Event Settings] in Step 5 on Page 10. With the settings shown on the right, when you press [ Show Specified Page ] on the User Events Details screen of Troubleshooter, the [Emerstop] page appears.