４ .Description of the HMI Remote Viewer Screen ４ Description of the HMI Remote Viewer Screen This section describes HMI Remote Viewer screens on the iOS device. ４ - １ Initial Screen This is the initial screen after starting the HMI Remote Viewer. A list of the registered NA/NB is displayed on the screen. (3) (1) (2) 11 No Name Description 1 Thumbnail • Moves to the setup screen by pressing a thumbnail. • Displays screens at a time when VNC was disconnected in thumbnail view. • Displays a Sysmac logo if no connection has been made. 2 Display name • Sets any device name. • Displays an IP address if no name is set. 3 “+” button • Sets a new screen by pressing this button.