６ .Setting IP Address of the NJ ６ Setting IP Address of the NJ Perform the following procedure to set an IP address of the NJ. 15 1. Select [Multiview Explorer]->[Configurations and Setup]->[Controller Setup]->[Built-in EtherNet/IP Port Settings] on the NJ project. Double-click (or right-click-> Edit) to open the ”Built-in EtherNet/IP Port Settings” table. Explorer]->[Configurations and Setup]->[Controller Setup]->[Built-in EtherNet/IP Port Settings] on the NJ project. Double-click (or right-click-> Edit) to open the ”Built-in EtherNet/IP Port Settings” table. 2. Set the IP address and subnet mask as follows; IP address：192.168.250.1 Subnet mask：255.255.255.0 3.
Transfer the project to the NJ.