９ .Setting the WE70-AP ９ Setting the WE70-AP A Wifi router is required to connect to an iOS device with Ethernet communications. Perform the following procedure to connect the NA-series to an iOS device using OMRON “WE70-AP”. 20 1. Connect the WE70-AP to a PC with an Ethernet cable, and turn on the WE70-AP. 2. Set the IP address and subnet mask of the PC as follows; IP address：192.168.0.200 Subnet mask：255.255.255.0 * The above is just an example. You can set any IP address and subnet mask as long as they are not duplicated among other devices. mask of the PC as follows; IP address：192.168.0.200 Subnet mask：255.255.255.0 * The above is just an example.
You can set any IP address and subnet mask as long as they are not duplicated among other devices. 3. Start the Web browser and enter http://192.168.0.1 (default IP address of WE70-AP) on the address bar. A dialog on the right is displayed. Set “admin” for the user name and leave the password box blank, and press the ”OK” button. 4. The ”Network settings” screen is displayed on the browser. Set ”192.168.250.50” to the IP address and click the ”Apply” button. 5. Click “Advanced settings” to open. Select “Valid” for “Spanning tree function” and click the ”Apply” button.