１３ .Setting VNC for the NB Precautions for Correct Use When logging-in from multiple clients with VNC, there is no restriction on the number of devices to be connected simultaneously. However, the response speed of screens may be deteriorated when the number of connected devices increases. Therefore, you need to check acceptable number of devices to be connected in your environment before the connection. Precautions for Correct Use You can set values start with 0, such as "001234", as a password on the NB-Designer, however, 0 will be ignored and the password will be set as "1234". If you enter "001234" when logging- in, an error will occur. 33 4.
Set numeric passwords in range from 0 to 4294967295. (Within the range, no restrictions on the number of digits). A password must be set for monitor mode and operation mode, respectively. When the same password is set for both modes, the password is set for operation mode. from 0 to 4294967295. (Within the range, no restrictions on the number of digits). A password must be set for monitor mode and operation mode, respectively. When the same password is set for both modes, the password is set for operation mode. 5. If you want to log-in from multiple clients, select ”Enable Multi Access”.