NB-series Manuals Programmable Terminals Setup Manual (Cat. No. V107) Programmable Terminals Startup Guide Manual (Cat. No. V109) NB-series Programmable Terminals Host Connection Manual (V108) 3 Section Contents Section 1 Part Names and Functions This section describes the names and functions of the various parts of an NB Unit. Section 2 Installing the NB Unit and Connecting Peripheral Devices This section describes the methods used to install the NB Unit and connect peripheral devices. Section 3 System Setting Mode This section describes the System Setting Mode. Section 4 Calibrate Mode This section describes the Calibrate Mode.
Appendices The appendices provide information on specifications, dimensions, wirings, and lists of the NB Units, the applicable PLCs and options. Section Contents Section 1 NB Overview This section provide specifications of the NB Unit, describes its names and functions of the various parts. Section 2 System Design This section describes the manual structure, takes NB7W as an example to introduce the operation procedures of the NB system. Section 3 Installation and Wiring This section describes how to install and wire the NB Unit. Section 4 Screen Creation This section describes how to create a demonstration project through NB-Designer.
Section 5 Run This section describes how to start running at the Host side and prepare to send screen data to NB7W. Section 6 Maintenance and Troubleshooting This section describes the maintenance and inspection methods for preventing errors occurring, and troubleshooting measures when errors occur. WARN ING Failure to read and understand the information provided in this manual may result in personal injury or death, damage to the product, or product failure. Please read each section in its entirety and be sure you understand the information provided in the section and related sections before attempting any of the procedures or operations given.