NERLITE Smart Series Ring Illuminator Configuration Guide (EN)

NERLITE Smart Series Ring Illuminators Configuration Guide Hardware Required 1 1 1 1 Smart Camera or Auto ID Reader 4 Host (Ethernet 8-pin Plug to RJ45 -OR- (Serial 12-pin Plug to D89) 3 3 Light (12-pin Socket to 5-pin Socket) Customer supplied signal source Customer supplied signal source Common (12-pin Plug to 12-pin Socket) 3 2 Power Supply (12-pin Socket) Photo Sensor 2 2 Figure D Ring Series Illuminator with QX-1 Interface Device Figure A Ring Series Illuminator with power supply Figure B Ring Series Illuminator with customer supplied dimming or on-off signal source Figure C Ring Series Illuminator with customer supplied strobe trigger signal source P/N 83-230017-02 Rev B Continuous Mode Continuous Mode With Dimming Or On-Off Control High Output Strobe Mode PART NUMBER DESCRIPTION Current Draw @ 24VDC (max.) No Controller Required (Can Be Connected Directly To 24VDC) No Controller Required (Can Be Connected Directly To 24VDC) No Controller Required (Can Be Connected Directly To 24VDC) NER-011660800G SMART SERIES R-60, RED 1.20A Figure A or D Figure B Figure C NER-011660810G SMART SERIES R-60, WHITE 0.70A Figure A or D Figure B Figure C NER-011660820G SMART SERIES R-60, BLUE 0.70A Figure A or D Figure B Figure C NER-011660840G SMART SERIES R-60, ULTRAVIOLET 0.23A Figure A or D Figure B Figure C NER-011660900G SMART SERIES R-70, RED 1.20A Figure A or D Figure B Figure C NER-011660910G SMART SERIES R-70, WHITE 0.85A Figure A or D Figure B Figure C NER-011660920G SMART SERIES R-70, BLUE 0.85A Figure A or D Figure B Figure C NER-011661100G SMART SERIES R-100, RED 1.70A Figure A or D Figure B Figure C NER-011661110G SMART SERIES R-100, WHITE 1.10A Figure A or D Figure B Figure C NER-011661120G SMART SERIES R-100, BLUE 1.10A Figure A or D Figure B Figure C Item Description Part Number 1 Smart Series Ring Lights NER-011660XXXG 2 Power Supply DSP60 24VDC 2.5A DIN Mount NER-011504100 2 Power Supply DSP100 24VDC 4.2A DIN Mount 97-000006-01 3 Cable 5 Pin M12 Female To Flying Leads, 3M 61-000186-01 3 Cable 5 Pin M12 Female To Flying Leads, 5M 61-000187-01 4 Cable, Power Smart Series to QX-1 61-000204-01

Стр. 1

NERLITE Smart Series Ring Illuminators Accessories Connections: Continuous On-off Dimming Strobe Control Signals DIM (Continuous Mode With PWM Dimming): 0VDC (LEDs off) to 3.1-3.5VDC (LEDs on) pulse width modulated (PWM) signal , Note: When using Continuous Mode With Dimming, the LED duty cycle will equal the duty cycle of the dimming signal. DIM (Continuous Mode With On-Off Control): 0VDC (LEDs off), 3.1-3.5VDC (LEDs on), ( TRIG (High Output Strobe Mode): optoisolated, 0VDC (LEDs off) to 3.1-28.8VDC (LEDs on), 10mA max, 20 μs min Trigger pulse width. Note: High Output Strobe internally limits LED frequency and pulse width to a maximum of 90Hz and 1mS respectively.

Light output pulse will follow Trigger pulse width from 20 μs to 1ms. Note: When using Continuous Mode With Dimming, the LED duty cycle will equal the duty cycle of the dimming signal. Cable Specifications: Wire colors for flying lead cables: Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray Connector Nut = Shield Note: Non-Omron Microscan cables may use different wire colors. It is the customer’s responsibility to make sure the light is connected correctly per the pin numbers in the table above. Copyright ©2019 Omron Microscan Systems, Inc.

www.microscan.com Description Part Number Application AC Power Cord US NER-030028300 Power Cord For Power Supply AC Power Cord EU NER-030028400 Power Cord For Power Supply AC Power Cord UK NER-030028500 Power Cord For Power Supply Input Connector (M12 Male, 5 Circuit, A-Code) Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Backshell Continuous Mode (Figure A & D): +20.2-28.8VDC DC GND DC GND +20.2-28.8VDC No Connection Shield Continuous Mode With Dimming (Figure B): +20.2-28.8VDC DC GND DC GND & DIM (-) +20.2-28.8VDC Dim (+) Shield Continuous Mode With On-Off Control (Figure B): +20.2-28.8VDC DC GND DC GND & DIM (-) +20.2-28.8VDC Dim (+) Shield High Output Strobe Mode (Figure C):

+20.2-28.8VDC TRIG (-) DC GND TRIG (+) No Connection Shield

Стр. 2