15 2 Connect the Ethernet connector on the smart camera to the PC using the Ethernet cable Ethernet cable V430-WE-2M. V430-WE-3M Turn ON the DC24V power supply. Ethernet Connector 3 Set the IP Address of the PC. Set the IP Address to "192.168.188.100" set the subnet mask to "255.255.0.0". Refer to Step 4 for the procedure to open the dialog on the right on a Windows 7 system. 4 (1) From the Windows Start menu, select Control Panel - Network and Internet - Network and Sharing Center. (2) Click on Local Area Connection. The Local Area Connection Status Dialog Box is displayed. Click Properties.
(3) In the [Local Area Connection Properties] dialog box, select [Internet Protocol Version 4 (TCP / IPv4)], and click the [Properties] button. (4) Click the "OK" button 5 Launch the AutoVision software.